Monday, 16 September 2019
banner_top_2
National Analogue Circuits


These circuits correspond to 1 pair (2 wires) and have the objective of installing exterior extensions or the transmission of voice, always with analogue technology.

These services depend on the availablilty of adequate technological infrastructure.



Analogue Circuit - Installation Fee (2 wires) Per Termination


TypePrice
Nacional Analogue Circuit Instalation 2 wires - Without Interconnection between Central Points/Switches $90.00
Nacional Analogue Circuit Instalation 2 wires - With Interconnection between Central Points/Switches $90.00
Nacional Analogue Circuit Instalation 2 wires - Interior Instalation $45.00
Reactivation (from 30 days to 60 days) $4.50
Reactivation without Interconnection (from 60 days to 90 days) $90.00
Reactivation with Interconnection (from 60 days to 90 days) $90.00
Interior Reactivation (from 60 days to 90 days) $90.00


Analogue Circuit - Monthly Fee (2 wires) Per Termination


TypePrice
Nacional Analogue Circuit 2 wires - within local network – Fixed Price $45.00
Nacional Analogue Circuit 2 wires - within local network– Variable Price per hectometer $2.70/hm
Nacional Analogue Circuit 2 wires - within local network– Maximun variable price $360.00
Intercity connection until 50Km - Variable Component $0.00
Intercity connection from 50Km to 100Km - Fixed Component $0.00
Intercity connection from 50Km to 100Km - Variable Component $0.00
Intercity connection from 100Km to 300Km - Fixed Component $0.00
Intercity connection from 100Km to 300Km - Variable Component $0.00
Intercity connection more than 300Km - Maximun Price $0.00
Nacional Analogue Circuit 2 wires – Intercity extension $0.00
Analogue Circuit Monthly –Intercity extension $0.00


Notes:
- Measurement of the distance from the  terminations is done in meters and corresponds to the actual length of the galvanic circuit.
- The total distance is the sum of the distances of terminations in hectometers, rounded to the nearest whole number for excess.
- The fee charged to the customer has two components: Fixed and Variable, calculated as follows:
       Fixed Component = 7910 (circ monthly fee. Analog. - Same local network - fixed) * 2 (both ends).
       Variable Component = 7910.1 (tuition fee value / hm circ. Analog. - Same local network - variable) * Total distance (hm)
- Total distance (hm) = Distance 1st termination (m) + Distance 2nd (m) termination
- The variable component has a maximum value of $ 360 (Fee 7910.2).




Analogue Circuit - Installation Fee (4 wires) Per Termination


TypePrice
Nacional Analogue Circuit Instalation 2 wires - Without Interconnection between Central Points/Switches $180.00
Nacional Analogue Circuit Instalation 2 wires - With Interconnection between Central Points/Switches $180.00
Nacional Analogue Circuit Instalation 2 wires - Interior Instalation $90.00
Reactivation (from 30 days to 60 days) $4.50
Reactivation without Interconnection (from 60 days to 90 days) $90.00
Reactivation with Interconnection (from 60 days to 90 days) $90.00
Interior Reactivation (from 60 days to 90 days) $90.00



Analogue Circuit - Monthly Fee (4 wires) Per Termination


TypePrice
Nacional Analogue Circuit 2 wires - within local network – Fixed Price $90.00
Nacional Analogue Circuit 2 wires - within local network– Variable Price per hectometer $5.40/hm
Nacional Analogue Circuit 2 wires - within local network– Maximun variable price $720.00
Intercity connection until 50Km - Variable Component $0.00
Intercity connection from 50Km to 100Km - Fixed Component $0.00
Intercity connection from 50Km to 100Km - Variable Component $0.00
Intercity connection from 100Km to 300Km - Fixed Component $0.00
Intercity connection from 100Km to 300Km - Variable Component $0.00
Intercity connection more than 300Km - Maximun Price $0.00
Nacional Analogue Circuit 2 wires – Intercity extension $0.00
Analogue Circuit Monthly –Intercity extension $0.00


Notes:
- Measurement of the distance from the  terminations is done in meters and corresponds to the actual length of the galvanic circuit.
- The total distance is the sum of the distances of terminations in hectometers, rounded to the nearest whole number for excess.
- The fee charged to the customer has two components: Fixed and Variable, calculated as follows:
       Fixed Component = 7910 (circ monthly fee. Analog. - Same local network - fixed) * 2 (both ends).
       Variable Component = 7910.1 (tuition fee value / hm circ. Analog. - Same local network - variable) * Total distance (hm)
- Total distance (hm) = Distance 1st termination (m) + Distance 2nd (m) termination
- The variable component has a maximum value of $ 360 (Fee 7910.2).



Last Updated on Saturday, 02 August 2014 09:10
 
ban_right_servicos